Pressure Leaf Filter Filtering Leaves Cleaning and Maintenance

Pressure Leaf Filter Filtering Leaves Cleaning and Maintenance is really important and necessary for ensure high filtration working efficiency of pressure leaf filters and increase service life. especially for the main parts of the equipment. Filter leave plate is the key. Following are the cleaning method of the filter leaves hope useful for you.

Pressure Leaf Filter Filtering Leaves Cleaning and Maintenance

Pressure Leaf Filter working for a period of time and When the working time of the filters is very short and the pressure rises quickly, it is often caused by clogging of the filter leave screens. At this time, you should first check the filter screen. Place the filter screen in a bright place and observe it at a 45° angle to the filter screen. If it is found to be clogged, clean it in time. Cleaning method of fully automatic pressure leaf filter leave mesh is as show.

Pressure Leaf Filter Filtering Leaves Factory manufacturing

1. Pressure Leaf Filter Filtering Leaves Mechanical Cleaning

Mechanical cleaning of the pressure leaf filter filtering leaves is more Simple and efficient. Customer just need to use 0.6 to 0.8MPa high-pressure water to spray clean, place the filter screen vertically on the wooden board, with the filter screen outlet facing downwards, and spray the high-pressure water nozzle at a 45° angle with the filter screen. The filter screen can also be cleaned with 0. 3 0.5MPa steam. The operation method is the same as high-pressure water spray cleaning, and good results can be achieved.

Pay special attention to the fact that the filter leave screen must not be washed in reverse or reverse flow, which will cause the filter to bulge or even tear the filter. Don’t use a brush or metal scraper to brush the pressure leaf filter leaves. Doing so will not only clog the filter, but also scratch it.

Pressure Leaf Filter Filtering Leaves Cleaning by operators

2. Chemical treatment for Pressure Leaf Filter Filtering Leaves Cleaning

Place the pressure leaf filter filtering leave screen in a pure pool for cleaning. The cleaning solution is 10-15% NaOH solution (or a cleaning solution that has no corrosive effect on the filter screen). The temperature is 50^60″C. The cleaning time generally does not exceed 3 hours. Please note Never use hydrochloric acid or detergents that generate free chlorine ions for cleaning, as this will seriously corrode the pressure leaf filter.

Regular inspection and cleaning for the filter leaves of the pressure leaf filter is very important. And Loreek Machinery has accumulated solid liquid filtration experiences in many industries and achieved very good filtration effects and economic benefits. Welcome to Contact Us Now!