What is Horizontal Pressure Leaf Filter Operation Process?

Jun21,22

Horizontal Pressure Leaf Filter filtration working operation process is easy and simple. Customers need to know the basic processing of the filtration steps. The operation process of the fully automatic horizontal pressure leaf filter is as following. hope useful for you.

Horizontal Pressure Leaf Filter Operation Process

Check the horizontal pressure leaf filter ensure all filter conditions are good and then turn on the filters. As the filtration time increases, more and more solid impurities are trapped on the filter leaves screen, which causes the thickness of the filter cake to increase. This increases the pressure leaf filter resistance and the pressure in the tank. When the pressure rises to a certain value, it is necessary to discharge the slag, stop inputting the liquid to be filtered into the pipe, blow the compressed air into the tank through the overflow pipe, blow the liquid to be filtered in the tank into other containers, and blow dry the filter cake. Turn off the compressed air (manufacturers with conditions can use steam or hot nitrogen), open the butterfly valve, start the vibrator, vibrate the filter leave plate, shake off the filter cake on the filter plate and discharge it through the slag discharge port of the butterfly valve below the tank.